How do I power my Control?

Your Control comes with a 120VAC to 12VDC, 12W power adapter. If this power adapter is damaged or missing, do not attempt to find another one. Please contact support.

 

Power Issues:

  • Use only the provided power adapter.
  • Check that the power adapter is plugged in securely at both the Monitor and the wall (house power).
  • Verify that any adaptors are undamaged and in working condition.

 

 

The power adapter plugs into the Control on the side, as shown below.

 

 

control-with-power_dark.png

 

Note: The barrel connector of the power adapter will not be fully inserted into the Control (expect a few millimeters of the silver end to be showing.) If the connector is fully in place, you should see the LEDs on the top of the Control light up. 

Comments

Please sign in to leave a comment.