My system is getting the "triple blue led" right after wifi configuration. I've attempted the wifi reset procedure 3 times but always get back to this state after trying to connect to my wifi. The signal strength shows full when selecting my network and I can see my DHCP server providing the streamlabs monitor's MAC address with a good IP address. I even made it a static IP address in case that would help. Is there some port I should be opening up on my network or some other procedure I should try to get past this point? I've got a pretty good WiFi set up at home with plenty of other smart devices.
Comments
My system is getting the "triple blue led" right after wifi configuration. I've attempted the wifi reset procedure 3 times but always get back to this state after trying to connect to my wifi. The signal strength shows full when selecting my network and I can see my DHCP server providing the streamlabs monitor's MAC address with a good IP address. I even made it a static IP address in case that would help. Is there some port I should be opening up on my network or some other procedure I should try to get past this point? I've got a pretty good WiFi set up at home with plenty of other smart devices.
Very Respectfully,
Oscar
Hi Oscar,
The following ports need to be open for your StreamLabs device to connect properly:
MQTT on port 8883
HTTP on port 443 and 80
DNS on port 53
NTP on port 123
Thanks!
Please sign in to leave a comment.